4m×10m Large Aerospace Composite Autoclave Site Installation and Commiss...

What are the Safety Accessories of the Steam Curing Autoclave?

Steam curing autoclave (also called AAC autoclave or autoclave for brick) is a large volume, heavy weight pressure vessel to produce a type of precast concrete composed of natural raw materials. The AAC autoclave can be used to produce aerated concrete block, concrete pipe pile, new lightweight wall material, asbestos insulating board, high strength gypsum, lime sand brick, coal ash brick, microporous calcium silicate board and other building materials autoclaved curing. The AAC Steam curing autoclave can also used for technical process projects that need autoclaved curing.

Steam curing autoclave as pressure vessel, belongs to special equipment, will have safety accessories. There are a lot of customers will ask what safety accessories have on aac autoclave. Now will introduce the autoclave safety accessories to you.

The main steam curing autoclave safety accessories are safety locks and safety valve. Autoclave safety locks consist of safety handle, seat, connecting rod and ball valve, fixed on the autoclave body flange side. When the autoclave cover closes, the safety handle will be turned to the level. Locking the autoclave cover, it can not open, the exhaust ball valve will be closed accordingly. When the autoclave cover opens, firstly vertical the safety handle and then the ball valve also open. In order to avoid dangerous the autoclave cover can open only after the residual steam in the autoclave is discharged through the ball valve.

AAC autoclave safety valve is an automatic pressure relief part that should be installed to ensure the pressure under the designed limit. As a usual, steam curing autoclave will equip 2 safety valves due to its long length.The safety valve rated open pressure will be adjust based on the steam curing autoclave allow working pressure. So when choosing and installing the safety valve, the safety valve pressure will be high than the autoclave working pressure. The safety valve will open automatically when the pressure is over the rated design pressure to avoid the autoclave damage and people die.

Steam curing autoclave safety accessories seems simple, but in fact needs operate carefully and cautiously. So when you choose the steam curing autoclave manufacturer, it should have many experience due to the high requirement for manufacture standard. Just in case to avoid loss when choosing and improper operation safety valve.

About Taian Strength Equipments

Taian Strength Equipments Co., Ltd is a pressure vessel manufacturer of AAC autoclave design and manufacture over 20 years, can provide the products design, manufacture and after sales based on your requirement. We also can provide OEM, ODM service. Taian Strength Equipments Co.,Ltd has many excellent R & D experts, 2 million square meters of manufacturing plants and more than 50 large manufacturing machines. We have already obtain a long and stable cooperation with many domestic famous aerated brick production line equipment manufacturers, pipe pile manufacturers, light wall panel manufacturers, aerated concrete plate manufacturers due to our high quality and fast delivery. Now our products and after sales were all over the country, products has exported to more than 36 countries. We have win the high words form users, sincerely welcome domestic and abroad friends come to visit, negotiation and cooperation.

The Features of Autoclave Oven for Carbon Fiber

Autoclave oven for carbon fiber (also called composite autoclave) is the kind of widely used industrial autoclave which can control temperature, pressure, vacuum, cooling, cycle and other parameters in carbon fiber curing process. The autoclave oven for carbon fiber equipment mainly consists of mechanical body, functional parts and control system. Mechanical parts include contains shell, below plate, trolley, gas flow control device, seal parts and so on. Functional parts consist of heating, pressure, vacuum and cooling system. Control parts include temperature, pressure manual and automatic system.

Features of Autoclave Oven for Carbon Fiber

1. The autoclave oven for carbon fiber belongs to the high pressure vessel, the safety is the most important. Taian Strength Equipments Co., Ltd designs double safety locks no matter autoclave oven for carbon fiber door or shell body.
2. The autoclave oven for carbon fiber requires high quality  temperature balance, pressure stable, vacuum durability, and it should integrate these three parameters as a whole. Taian Strength Equipment Co., Ltd brand carbon fiber autoclave can control the temperature between -4℃ and +4℃, no matter the carbon fiber autoclave size.
3. The carbon fiber autoclave should work for a long time with no breakdown, all user pay more attention on it. All of valve, electrical components, automatic valve, electrical appliances use Schneider brand, this can guarantee work stability.

The main advantage of autoclave oven for carbon fiber should have the uniform pressure and temperature in the tank. Under the joint action of the pressure and temperature, it can meet the requirement of high fiber content of composite material, low porosity of the formed components, uniform resin content, and high mechanical properties and stable physical properties. The carbon fiber autoclave is used for laminating, sandwich, bonding, sewing and other structures. The mold is also relatively simple and efficient, especially suitable for curing and forming large composite material components with high performance requirements.

About STRENGTH Equipments

Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines. Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.

STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service. ODM, OEM are also available. If you have any questions or inquiries, please fill and submit the following form, we will reply as soon as possible.

Main System Composition of Automatic Autoclave

Automatic autoclave ( also called composite autoclave) is used for metal/non-metal adhesive components and resin based high strength glass fiber, carbon fiber, boron fiber, arylon fiber and other composite materials, such as aircraft doors, fairing, airborne radome, bracket, wing, tail, etc. The automatic autoclave is a set of system equipment, it can realize the sequential and real-time control of process parameters such as temperature, pressure, vacuum, cooling and circulation.

Main Subsystems of Automatic Autoclave

• Tank Body: High pressure and high temperature, with tank body, tank door mechanism, high temperature motor, wind tunnel plate thermal insulation layer, etc.
• Safety Interlock Device: High – voltage automatic interlock, manual interlock, high – voltage alarm device.
• Quick Opening Device: Manual and electric dual-purpose quick opening design, it can normally open and close the tank door in case of power failure.
• Tank Door Sealing Device: Tank door using silicone inflatable sealing, high pressure 400℃, no wear.
• Pressure System: Pressure transmission and control system, with compressor, gas storage tank, pressure control valve, pipeline, pressure transmitter and pressure gauge.
• Heating System: In the automatic autoclave forming process, the far infrared quartz electric heat pipe as the heating source, the fluid medium (generally air under low temperature condition, inert gas under high temperature condition) as the heat transfer carrier, and the fan as the forced gas circulation power to complete the process of the circular heating of the molding tool. In the cooling stage, the cooling process of the tooling is realized by circulating water to remove heat.
• Temperature Circulating System: With circulating fan, air guide plate and guide cover to accelerate heat conduction and circulation, forming uniform temperature field.
• Vacuum System: It consists of vacuum pump, pipeline, vacuum meter and vacuum valve, providing vacuum conditions for encapsulated composite prefabricated parts.
• Automatic Control System of Automatic Autoclave: It adopt Siemens PLC control system, to realize the pressure, temperature, cooling and other process parameters of the full precision control and real-time recording.

About STRENGTH Equipments

Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines.  Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.

STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service.  ODM, OEM are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.

Temperature and Pressure Required for Autoclave Oven Carbon

Taian Strength Equipments Co., Ltd is the professional autoclave oven carbon manufacturer. The autoclave oven carbon is also known as  composite autoclave. We are the  pressure vessel designer and manufacturer certificated with ASME U and U2, and we also have D1/D2, A2 pressure vessel manufacturing capacity. Our company has all qualified manufactured certifications, professional testing center with different testing equipment to ensure quality, and perfect quality guarantee system.

Technical Principles for Autoclave Oven Carbon

1.  High temperature and pressure gas are adopted in autoclave oven carbon to cure the blank into forming, the autoclave oven carbon gas mainly have air, nitrogen and carbon dioxide.

2. Prepress preparation,  cutting, stacking, forming and curing.

3. Forming, suction plastic, heat transfer with curing process, fiber reinforced, resin curing, resin flow, bubble formation and movement, residual stress deformation.

4. Technical process characteristics such as temperature and pressure required for autoclave oven carbon.

A.Pressure balance in the autoclave oven carbon, use compressed gas or inert gas or gas mixture to rise pressure in the tank body, these pressure will be into surface of vacuum bags, then carbon fiber will cure and forming.

B.Temperature balance, heating or cool gas loop in the autoclave oven carbon at a high speed, will make sure temperature generally same at every place. On the premise of reasonable mold structure, can guarantee the sealing parts temperature in the mould not have a big difference.

5. The autoclave oven carbon is widely used in different industries, the mold is relatively simple and efficient, which is suitable for the forming of skin, wall and shell with large area and complex surface. If the size of autoclave oven carbon is large, multiple layers of molds can be placed at one time, and various complex structures and components of different sizes can be formed at the same time. The temperature and pressure can meet the molding process requirements of almost all polymer matrix composites, such as low-temperature molding polyester composites, high-temperature and high-pressure molding PI and PEEK composites, and can also complete the molding of seam /RFI processes.

Application of Autoclave Oven Carbon

The autoclave oven carbon can be used for metal or nonmetal bonding components and resin based high strength glass fiber, carbon fiber, boron fiber, aramid fiber and other composite materials. Such as aircraft doors, fairing, airborne radome, support, wings, tail, etc.

The SIEMENS PLC is adopted to control the temperature, pressure, vacuum and time. This autoclave oven carbon is a new type high temperature curing equipment which features of saving energy, high efficiency and environment friendly. It has a good results when automatically operate. The controlling system is specially developed for automatic vacuum, automatic temperature, automatic insulation, automatic pressure, automatic pressure relief, automatic control of working time. It can change working time, working temperature, working pressure, working vacuum at any will. It can come true for direct bring products automatically after design its program, this will save manual, costs for company. As estimated, it can save 25% manufacture costs. Also U disk can be used to copy storage temperature, pressure curve, etc.

About STRENGTH Equipments

Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines.  Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.

STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service.  ODM, OEM are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.

Software Introduction of Carbon Autoclave

Carbon autoclave (also called composite autoclave) system  is specially designed for composite materials production, it is very important to develop software to control completely control of the internal temperature, pressure and vacuum according to the composite material technical requirements.  The resin reaction process is the main composite material curing process, therefore, the development requirements of composite curing process include the curing of the resin properties, the thermal properties of mold, product accuracy requirement, layer design and other complex technological factors. With the addition of these technological factors, the control ability of carbon autoclave equipment is highly required.

Meanwhile, with the spread of the application range of composite materials, the output is increasing, and the cost requirements are constantly reduced, the control functions of the equipment should be optimized to control when multiple products are imported at the same time. The reasonable control method should be realized to improve the energy conservation and reduce the cost at the same time.

At present, the development of composite technology is very fast, the curing characteristics of the resin is more and more optimized, for small size, low requirements of composite components, with the promotion of “beginning pressure” resin, process simplification, the requirements for carbon autoclave control system is reduced. However, for the larger size, more complex and special functional resins and other high-end fields require a strong control function to achieve the process objectives. For mass production of composite components, curing processes are the key to control the quality stability of composite component processes to ensure that every batch production in the same curing condition to finish curing. In order to ensure the quality consistency, the automation level of the software for the control of the carbon autoclave puts forward high request, “no human intervention” realizes full automation, the same process consistency is important in the cases of the control function of requirements.

In conclusion, the main control parameters of the carbon autoclave system are  temperature, pressure and vacuum. However, in combination with the technological characteristics of composite materials, especially to realize the automation of the curing process of composite materials, the functional requirements of control software are very high, and the group of software development technicians should have a deeper understanding of the technological characteristics of composite materials and curing processes.

STRENGTH Equipments also has the manufacturing ability and the composite material product development ability, in order to provide users with better equipment, help users to achieve high-end product production, after long-term efforts, developed a set of carbon autoclave system special control system and software.

1. Control Structure

The control system is based on bus-based hardware design. The main controller adopts Siemens controller, industrial bus communication, strong anti-interference ability, large amount of data. The upper computer adopts industrial control computer and software monitoring, which can display the alarm, report and record the temperature rise curve in real time, and monitor the running status of the equipment.

①Adopt dual core working mode. The computer analyzes the process and reads the process in advance to make and judge the future temperature and pressure changes. The PLC executes the instructions of the upper computer, performs real-time comparison operation between the target value and the actual measurement value, and adjusts the output signals of temperature and pressure.

②Implement redundant control. In order to ensure that the production will not be affected in the case of PLC failure, the manual redundancy control is added, and the intelligent instrument redundancy control can be added.When intelligent instrument redundancy control is adopted, the upper computer sends instructions completely, and the instrument control and PLC automatic control can achieve seamless connection.

③Modular installation ideas.The thermocouple and vacuum signals are collected by modularization and sent to the upper computer by the communication module, which greatly reduces the wiring and interference and simplifies the difficulty of installation and maintenance.

2. Main Interface Description

The upper computer interface is divided into monitoring interface, operation interface, maintenance interface, warning interface and other four interfaces. In order to prevent the wrong operation, according to the different permissions, the operation mode of different interface open different permissions.

About STRENGTH Equipments

Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines.  Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.

STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service.  ODM, OEM are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.

Autoclave Carbon Equipment

Autoclave carbon equipment, also called composite autoclave, is the hot pressing curing molding key equipment which is mainly used for the production of metal, non-metal adhesive structural parts and resin such as high strength glass fiber, carbon fiber, boron fiber, aramide fiber and epoxy resin composite, etc. The autoclave carbon equipment can realize heating and pressure curing molding under the condition of vacuuming the composite material products.

Autoclave carbon equipment is the key process equipment for polymer matrix composite component product molding. The forming process is to seal the composite blank, honeycomb sandwich structure or bonding structure on the mold with a vacuum bag, putting it into a autoclave carbon, and then in the vacuum (or non vacuum) state, through the process of temperature rise, pressure rise, heat preservation (medium or high temperature) pressure maintaining, temperature drop and pressure relief, making it become the shape and quality state products. Autoclave carbon forming process is one of the main forming methods of composite structure, honeycomb sandwich structure and metal or composite bonding structure which are widely used. When the material is formed, the uniform temperature and pressure environment provided by the autoclave carbon are used to realize the curing, so the surface and internal quality are high, the structure is complex, and the area is huge.

The curing of composite matrix resin is not only related to the molecular structure of resin, but also related to other components (curing agent, crosslinking promoter, etc). Outside conditions temperature, pressure and time factors on the curing play an important role, these three factors are often referred to the main process parameters according to the change rule of the molecular structure of matrix resin determine its corresponding technological parameters, autoclave carbon and all the autoclave carbon molding process method must be able to control the function of these parameters.

The autoclave carbon equipment produced by our company can achieve the unity of the workpiece, mold and air temperature in the vacuum bag, effectively control the temperature difference between different positions of the workpiece, the working temperature difference can be controlled within ±1℃.

About STRENGTH Equipments

Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines. Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.

STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service. ODM, OEM are also available. If you have any questions or inquiries, please fill and submit the following form, we will reply as soon as possible.