2019年2月15日星期五

Elliptical Cap was Exported to Indonesia on December

Elliptical cap is one part of industrial autoclave,oil storage tank,boiler. It is widely used for industrial autoclave,oil storage tank,boiler and other pressure vessel.
On 27th to 28th April. 2017, Indonesia customers came to our factory to visit. They visited our elliptical cap factory. They mainly visited our steel material, welding material room, laboratory, inspection room, workshop, technical department, office. After the visit, they were very satisfied with our factory and purchased a number of elliptical cap.
On 3rd,December,2017. elliptical cap exported to Indonesia.This was the second order from this Indonesia customer.
This order elliptical cap diameter is two sizes 810 mm, 1424 mm. Thickness is 19 mm and 22 mm,every size quantity is 2 pieces.
It is used for boiler to our customer. Because diameter size 810 mm and 1424 mm are not regular size.Our mold sizes are 800 mm and 1400 mm,so we made new mold for customer. According to customer’s request, we made groove on the elliptical cap edge. For better quality, we made sand blasting on elliptical cap surface.It let our products more better in appearance.
Elliptical Cap was Exported to Indonesia on December

Elliptical Cap was Exported to Indonesia on December 1

Our company  can produce and control quality according to Chinese standard and ASME standards. We have a perfect  quality assurance system and technical support, can provide high-quality products for customers all over the world.
We have a mature R & D design team, skilled manufacturer worker, skilled welder, advanced equipments. And we have long-term cooperation with a number of scientific research institutions. We can make elliptical cap , torispherical dish end, hemispherical tank heads. We can also manufacturer different shapes of the head according to customer’s  drawings and requirements.
About STRENGTH Equipments
Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines.  Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.
STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service.  ODM, OEM are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.

2019年2月12日星期二

British Customer Visited Our Horizontal Autoclave Machine

Horizontal autoclave machine (also called industrial autoclave or autoclave industrial) is a large-volume, heavy-weight, quick-opening pressure vessel. The horizontal autoclave machine consists of a reaction vessel, a stirrer and a conventional system, a cooling system, a safety device, a heating furnace and the like. According to the process requirements, there are two types of autoclaves with and without agitator. The former structure is the same as the mixing equipment.
A British customer visited our Horizontal autoclave machine factory in September 2018. He visited the production environment of our factory and the working process of horizontal autoclave machine. He is very satisfied with our equipment and services. After that, he discussed some details with us and decided to sign a contract with us of horizontal autoclave machine.
British Customer Visited Our Horizontal Autoclave Machine

British Customer Visited Our Horizontal Autoclave Machine (2)

Specifications of Horizontal Autoclave Machine

  1. The kettle body and the kettle lid are made of 1Cr18Ni9Ti stainless steel. The kettle body is connected with the flange through the thread. The kettle lid is a positive flat plate cover. The two are tightly connected by the circumferentially evenly distributed main bolts and nuts.
  2. The main sealing port of the horizontal autoclavemachineadopts A-type double-line sealing, and the other sealing points adopt the sealing form of the arc surface and the line contact of the plane, the arc surface and the circular arc surface, relying on the high precision and smoothness of the contact surface,which is good sealing effect.
  3. The outside of the horizontal autoclavemachineis equipped with a barrel-type silicon carbide core, and the electric furnace wire is inserted into the furnace core, and the end of the furnace is threaded through the lower part of the furnace shell, and the rubber sleeve cable is connected to the controller through the connection stud.
  4. The lid of the horizontal autoclavemachineis equipped with a pressure gauge, a rupture membrane safety device, a vapor-liquid phase valve, a temperature sensor, etc., so that it is easy to know the reaction situation in the kettle at any time, adjust the proportion of the medium in the kettle, and ensure safe operation.
  5. The coupling is mainly composed of a pair of inner and outer magnetic rings with strong magnetic force, and there is a pressure-bearing spacer in the middle. The agitator is driven by a servo motor through a coupling. By controlling the speed of the servo motor, the purpose of controlling the stirring speed can be achieved.
  6. The upper part of the spacer is equipped with a speed measuring coil. When the integrated agitator and the inner magnetic ring rotate, the speed measuring coil generates an induced electromotive force. The potential corresponds to thestirring speed, and the potential is transmitted to the tachometer to display the stirring. Rotating speed.
  7. A cooling water jacket is installed between the magnetic coupling and the kettle lid. When the operating temperature is high, the cooling water should be passed, and the temperature of the magnetic steel is too high to demagnetize.
  8. The bearing adopts 1Cr18Ni9Ti stainless steel bearing or high-strength electrochemical graphite, which is resistant to wear and has a long maintenance period.

About STRENGTH Equipments

Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines.  Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.
STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service.  ODM, OEM are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.

2019年1月31日星期四

Wood Impregnating Tank Will Export to France

Wood impregnating tank is a kind of wood processing equipment which is mainly impregnated with wood impregnating liquid, so that the processed wood has many features in anti-corrosion, flame retardant, anti-mite, fireproof, insect-proof, modification, dyeing, canonization, degreasing and so on.

Wood Impregnating Tank Working Process

  • Preparation of impregnation liquid. Preparation of impregnation liquid, and then injected into the impregnation liquid storage tank. density of the impregnation liquid can be adjusted  as needed.
  • Feeding. First, the wood needs to be processed into the trolley, and then the trolley enters the wood impregnating tank through the track, then closing the wood impregnating tank door.
  • Vacuum operation. After the wood impregnating tank door closes, open the vacuum valve, close all other valves. Start the vacuum operation, and keep the vacuum.
  • Impregnation liquid inlet. After vacuum operation, the impregnation liquid enter the wood impregnating tank by using a negative pressure.
  • Pressurization. Pressurize according to different materials and standards. Allow the impregnation liquid to fully impregnate the wood. Choose different pressurization time, depending on the type of wood,
  • Drainage. The impregnation liquid is discharged, and the impregnation liquid enters the impregnation liquid storage tank.
  • Vacuum.The remaining impregnation liquid on the wood is discharged.
  • Discharge. First release the pressure before discharging, then open the wood impregnating tank door to discharge.
Wood Impregnating Tank Will Export to France

Wood Impregnating Tank Will Export to France 1


France customers wanted to buy one set wood impregnating tank. The diameter is 1.2 meters, effective length is 12 meters, working pressure is 18 bars, working temperature is normal temperature. The wood impregnating tank is made with carbon steel SA516Gr70. This set of wood impregnating tank includes wood impregnation tank, valves and instruments, PLC control cabinet, rails, trolley, storage tank, vacuum system and air compressor. France customers were satisfied with our quotation and quality, they placed one order to us. The wood  impregnating tank will be finished production and delivered next moth.


About STRENGTH Equipments

Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines.  Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.
STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service.  ODM, OEM are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.

2019年1月24日星期四

Uganda Customer Ordered Ellipsoidal Tank Heads

Ellipsoidal Tank Heads (also called elliptical dished head, elliptical end cap) is a part of pressure vessel, which is widely used for storage tank, heat exchanger, tower, reactor, boiler and separation equipment.
Our Uganda customer is the storage tank and vessel manufacturer and wholesaler, our dished head engineer designed technical scheme of ellipsoidal tank heads for him.

Specifications of Ellipsoidal Tank Heads

Normal Diameter: 3000mm
Thickness after forming: 10mm
Height: 750mm
Straight Flange: 40mm
Material: Q345R
Quantity: 2pcs
Design code: GB/T 25198-2010
Surface Treatment: Sand blasting
Uganda Customer Ordered Ellipsoidal Tank Heads

Uganda Customer Ordered Ellipsoidal Tank Heads  1

Ellipsoidal Tank Heads Forming Methods  

There are two types forming methods of elliptical dished heads, one is spinning, the maximum diameter is 8000 mm, thickness is 34 mm, the minimum diameter is 2200 mm; the other is stamping, the diameter from 159 mm to 4800 mm.
Carbon steel dished head should avoid cold forming. If cold forming, heat treatment should be carried out after forming. Stainless steel dished head is preferably cold formed. When hot forming is used, solution heat treatment is required. Heat treatment should be carried out according to the corresponding documents.
The welding joint of the carbon steel plate shall be smoothed and subjected to stress-relieving heat treatment, and then pre-pressed into an arch shape.
Pre-pressed arched work blanks shall not have any cracks or other defects, they may be inspected with a magnifying glass. When there is doubt, surface coloring or magnetic particle testing may be performed.

About STRENGTH Equipments

Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines.  Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.
STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service.  ODM, OEM are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.

2019年1月3日星期四

Autoclave Curing Of Composites Was Sold To Qingdao

Autoclave curing of composites is also called composites autoclave.It is used  for curing of composite material.It is one kind of  the pressure vessel specially designed and manufactured to fabricate composite material. Composite material  is made from two or more constituent materials with significantly different physical or chemical properties that produce a material with characteristics different from the individual components when combined. Autoclave curing of composites is one of the effective and most applicable techniques for composite production.
One Qingdao company contacted us, they researched, developed  and produced  rubber seal products, vibration and noise reduction rubber products,other polymer materials products and other composites.They need one set Autoclave curing of composites  to treat rubber,other polymer materials and other composites.
Autoclave Curing Of Composites Was Sold To QingDao

Autoclave Curing Of CompositesWas Sold To QingDao  1

Specifications of Autoclave Curing of Composites

According to customer request,we made one program for customer.We designed the effective diameter 1400 mm, the effective length 2500 mm, the maximum working pressure 1.6 Mpa, the maximum working temperature 250°C. The door opening mode was manual opening. Insulation used inner insulation.Vacuum system used 8-ways vacuum.The heating system used electric heating. The cooling system was equipped with a water-cooled motor.Control system used PLC with touched display screen,by clicking the button of touched display screen,we can control the  working pressure,operating temperature,control treatment of material situation  inside of Autoclave curing of composites. It was very easy  to operate and convenient.
Autoclave curing of composites is one of our hot sale industrial autoclave products.Our company mainly produces  pressure vessels like industrial autoclave, storage tank, gas tank, fuel tank, double wall tank, vulcanizing tank,dished heads like all kinds of tank heads, nuclear power dish head, all kinds of cone and shell. We had provided high competitive and finest quality products to over 20 countries. We are willing to become your partners with our high cost-performance products, excellent quality and perfect after-sale service.

About STRENGTH Equipments

Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines.  Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.
STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service.  ODM, OEM are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.

2018年12月27日星期四

Russia Customer Visited Our Stainless Tank Heads Factory

Stainless tank heads, also called tank heads, are the end caps on a cylindrical shaped atmospheric vessel and pressure vessel which are made with stainless steel. The stainless tank heads are widely used in atmospheric vessel or pressure vessels such as storage tanks, heat exchangers, towers, reactors, boilers and separations equipment. etc.
Our Russia customer came and visited our stainless tank heads factory on 27th June, 2018. Our Russia customer is a developer and manufacturer of equipment for the food industry in Russia and CIS countries for more than 12 years. The plant of capacitance equipment produces capacitance products for the food, chemical and oil and gas and oil refining industries. Both black and stainless steel are used as the material.
Russia Customer Visited Our Stainless Tank Heads Factory

Russia Customer Visited Our Stainless Tank Heads Factory 1

Russia customer fabricates pressure vessel for storage, transportation and sale of food liquids – kvass, mead, beer, milk, lemonade, compote, jelly, water, oil; for equipping restaurants, cafes, bars, canteens; for bottling and selling beverages in sales areas in supermarkets, mini markets, convenience stores; for equipping medical institutions; for the automotive and petrochemical industries.
Russia customer wanted to  buy the stainless tank heads using  in the top of beer tank. The stainless tank heads plays a part for seal. The stainless tank heads is an important part  in beer tank.Russia customer satisfied with our stainless tank heads factory. Russia customer wanted us to send two stainless tank heads samples to them. One of  materials for stainless tank heads is Chinese stainless steel 304 and the other material of the  stainless tank heads is European steel stainless steel AISI 304. The diameter of the two stainless tank heads is 1000 mm, thickness is 3 mm. After receiving the two samples, Russia customer will check, if quality is good, they will place order and build business cooperation with us.Hope we can build good business relationship between us in the future.

About STRENGTH Equipments

Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines.  Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.
STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service.  ODM, OEM are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.

2018年12月20日星期四

Aircraft Autoclave Was Fabricated For Xi’an Customer

Aircraft autoclave is the the kind of composite autoclave specially designed and manufactured to fabricate composite material that used in aircraft.
Aircraft autoclave is one of the our hot sale industrial autoclave products. Composite material (also called a composition material or composite) is made from two or more constituent materials with significantly different physical or chemical properties that produce a material with characteristics different from the individual components when combined.
Aircraft autoclave is one of the effective and most applicable pressure vessel for composite production that used in aircraft. In the composite manufacturing process, the assembly of a two-sided mold set that forms both surface of the panel is placed into the industrial autoclave which provides both required elevated pressure and elevated temperature.
Aircraft Autoclave Was Sold to Xi’an

Aircraft Autoclave Was Sold to Xi’an 1

Specifications of Aircraft Autoclave

Xi’an customer bought our aircraft autoclave mainly used in manufacturing aircraft parts. We designed and manufactured aircraft autoclave by customer’s request with effective diameter 3400 mm, effective length 7000 mm. For better treatment efficiency, we designed and manufactured  inner insulation inside of aircraft autoclave. For easy opening door, we designed  and manufactured  side opening with hydraulic system and automatic opening device. It’s very convenient to open the door and save space for our customer. We use Siemens PLC automatic control system with accuracy of ± 1-2 ℃ which can save energy and manpower, fully meet the performance requirements of products. This aircraft autoclave can produce good heat distribution and constant pressure .

About STRENGTH Equipments

Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines.  Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.
STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service.  ODM, OEM are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.