Pakistan Chemicals Company 4 ETFE Lined Vessel Tanks Successfully Finished

 2022.11.05 Pakistan one chemicals company 4 ETFE lined vessel tanks produced by Taian Strength Equipments Co.,Ltd successfully finished. The second cooperation between both of our two company successfully done.

Ethylene – tetrafluoroethylene copolymer is a kind of chemical substance. ETFE is the strongest fluorine plastic. In addition, ETFE keeps PTFE good heat resistance, chemical resistance and electrical insulation properties at the same time. Radiation resistance and mechanical properties have been greatly improved. In fact, Tensile strength can reach 50MPa, close to PTFE 2 times. ETFE has good processing formability, balanced physical properties, good mechanical toughness and excellent ray resistance. Furthermore, the material has the corrosion resistance of PTFE, which overcomes the non-stick and sexual defects of PTFE to metal. Also it makes ETFE (F-40) an ideal composite material for metal.

The material has the corrosion resistance of PTFE, but also has the strong adhesion characteristic of metal, overcome the non-adhesion defect of PTFE to metal, coupled with its average linear expansion coefficient close to the carbon steel linear expansion coefficient. So that ETFE (F-40) and metal ideal composite material, has excellent negative pressure resistance characteristics. Indeed, ETFE lined vessel tanks just take advantage of the ETFE and carbon steel. So ETFE lined vessel tanks is more and more popular welcomed by users.

This Pakistan chemical plant II ETFE lined vessel tanks is the second cooperation between our company and this company. In the previous batch of 7 vessel tanks replacement project, our company also contracted the construction. Thanks to our excellent product quality and good service. Our company still became the first choice of a chemical plant in Pakistan in the second phase of the ETFE lined vessel tanks project. Then replaced equipment ETFE lined vessel tanks is mainly used for the production of highly corrosive dichloroethane. And the production medium has high requirements for the corrosion protection of the ETFE lined vessel tanks.

Because the good cooperative relationship between our company and Pakistan Chemical plant. So the two sides soon reached an agreement on the technical agreement. As communicated by both parties, the manufacturing process of the ETFE lined vessel tanks renewal project will be inspected by ASME Lowe’s Company throughout the process. The main technical parameters of the ETFE lined tanks project are as follows:

Design standard: ASME SEC.VIII DIV 1 ED2021

Design pressure: 0.517Mpa

Design temperature: 150 degrees

Main equipment size: DN610*3300MM, DN610*3400MM, DN 610*3600MM, full vacuum negative pressure design, lining ETFE thickness of 3-4mm.

In recent months, the epidemic has been repeated in China. After our company has made great efforts and overcome all kinds of difficulties. As a result, the manufacturing of ETFE lined tanks hasve been successfully completed. Later tested by LR personnel, all the data fully met and exceeded the requirements of the owner. And the ETFE lined tanks perfectly.

Taian Strength Equipments Co.,Ltd will always adhere to the principle of quality first, service first, continue to provide customers with high quality products and services. Sincerely welcome friends from all domestic and the world to visit our company to negotiate.

About STRENGTH Equipments

Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines. Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.

STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service. ODM, OEM are also available. If you have any questions or inquiries, please fill and submit the following form, we will reply as soon as possible.

Air Receiver Delivered to Pakistan

 Air receiver (also called air storage tank, buffer tank, etc.) is a common pressure vessel used to store gas, it is one of the our hot sale pressure vessel products. Depending on customer requirements, STRENGTH can produce ASME, CE(PED), GB150 (Chinese standard) high pressure, atmospheric pressure or low pressure air storage tanks.

In the middle of March 2022, we received an inquiry from Pakistan. The customer wanted to purchase receiver tank to match air compressor. In addition, the customer provided specific parameters, volume 3m3, working pressure 1MPa. We design according to the customer’s requirements, the diameter is 1200mm, the height of the shell is 2200mmm. The air receiver according to ASME standard with U stamp and MDR, paint is epoxy anticorrosive. And it need to be equipped with safety valve.

Regarding the size of air receiver, according to the customer’s requirement, the diameter was changed to 1400mm. Then the height of the shell was changed to 1450mm. And we updated the price. Because the increase in diameter will also increase the thickness of the compressed air tank, which is also a major factor affecting the price. Finally the customer chose 1400mm diameter air receiver.

1 Volume 3m³

2 Diameter 1400mm

3 Height of Shell 1450mm

4 Working Pressure 1MPa

5 Material SA516GR70

6 Shape Vertical

7 Qty. 1

8 Manufacture Standard ASME SEC. VIII DIV 1 ED2021

9 Accessory Safety Valve

After full communication with the customer, we issued the GA drawing to the customer. The receiver tank started production at the end of August. During this period, Lloyd’s third-party AI came to our factory to witness the hydraulic test. In early November, the air receiver was shipped from Qingdao Port, China to Karachi Port, Pakistan.

About STRENGTH Equipments

Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines. Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.

STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service. ODM, OEM are also available. If you have any questions or inquiries, please fill and submit the following form, we will reply as soon as possible.

Pakistan one chemicals Company 7 buffer Vessel Tanks successfully Delivery

In the golden autumn of October, the land of Tai City is filled with the joy of harvest everywhere. On October 8, 2022.20, 7 buffer vessel tanks manufactured by Taian Strength Equipments Co.,Ltd for one Pakistan chemicals company were successfully completed . And it will be shipped to Tianjin port.

In addition, the 7 buffer vessel tanks will soon ride the wind and waves, set sail and stride toward their destination.

Benefiting from the East wind brought by the Belt and Road policy of the country . And the strong production demand of chemicals in the domestic market of Pakistan. A chemical plant in Pakistan urgently needs to replace a batch of buffer vessel projects to meet the increasing capacity needs. Next, the project department of a chemical plant in Pakistan approached our company through government channels this time. Moreover, they hoped that our company could provide the buffer vessel tanks needed for the equipment update. Thanks to the good cooperative relations established by our company with France Vinci , Pemex, Fluor and other world famous companies. Therefore , the two sides soon reached an agreement on the technical agreement for the buffer vessel tanks. After by both of us deeply communication, the equipment manufacturing process of this buffer vessel tanks renewal project will be inspected by ASME LR company. The main technical parameters of the buffer vessel tanks project are as follows:

Design standard: ASME SEC.VIII DIV 1 ED2021

Design pressure: 0.46Mpa

Design temperature: 134 degrees

Main equipment size: DN2650*6900MM, DN1000*2200MM, DN2800*8500MM, DN :600*1200MM, DN :1000*2000MM, DN1500*1600MM, DN700*18000MM.

After by three months tense and orderly manufacture. Also 7 buffer vessel tanks projects successfully finished production. Then, all the 7 buffer vessel tanks test results have perfect and over the customer requirements after by ASME LR AI inspected.

Taian Strength Equipments Co., Ltd will always adhere to the principle of quality first, service first, continue to provide customers with high quality products and services. In general, sincerely welcome friends from all domestic and the world to visit our company to negotiate.

About STRENGTH Equipments

Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines. Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.

STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service. ODM, OEM are also available. If you have any questions or inquiries, please fill and submit the following form, we will reply as soon as possible.

ASME Air Vessel Delivered to Malaysia

 ASME air vessel (also called compressed air tank, high pressure tank, buffer tank, etc.) is a common pressure vessel used to store gas, while stabilizing the system pressure. According to the different pressure of ASME air vessel. It can be divided into high pressure air vessel, low pressure air vessel, atmospheric pressure air vessel. Then the storage tank is generally composed of shell, dished head, flange, pipe, sealing element and support and other parts and components.

In the middle of June 2022, we received an inquiry from an old customer in Malaysia. The customer wanted to purchase ASME air vessel to support the ore thermal furnace equipment. Afterwards the customer provided specific parameters, volume 1m3, working pressure 1MPa. Finally we design according to the customer’s requirements, the diameter is 800mm, the height of the shell is 1700mmm. In fact, the ASME air vessel according to ASME standard without U stamp and MDR, paint is epoxy anticorrosive, and need to be equipped with safety valve, pressure gauge and other safety accessories.

Specifications of ASME Air Vessel ASME

No. Item Parameter

1 Volume 1m3

2 Diameter 800mm

3 Height of Shell 1700mm

4 Working Pressure 1MPa

5 Material SA516GR70

6 Shape Vertical

7 Qty. 2

8 Manufacture Standard ASME SEC. VIII DIV 1 ED2021

After full communication with the customer, we issued the construction drawings to the customer. The ASME air vessel started production at the end of June. During this period, Lloyd’s third-party AI came to our factory to witness the hydraulic test. In mid-August, the ASME air vessel was shipped from Tianjin Port, China to Port Klang, Malaysia.

About STRENGTH Equipments

Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines. Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.

STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service. ODM, OEM are also available. If you have any questions or inquiries, please fill and submit the following form, we will reply as soon as possible.

Dalian repurchased pressurizing and heating Composite Autoclave successfully Delivery to the Customer

 Pressurizing and heating composite autoclave is a kind of production equipment for materials related to materials science, mechanical engineering, textile science and technology, natural engineering and related technical fields. Moreover, Its main working principle is to use pressure and temperature to heat and press some composite materials to meet the curing requirements. Pressurizing and heating composite autoclave products now are more and more used in aerospace, automotive, high-speed train industries due to its high strength and light weight.

Now our company can manufacture different kinds of composite autoclaves which can meet the individual customization needs of different customers.

This time delivered pressurizing and heating composite autoclave is one of our previous cooperated Dalian customer new project. And new project have a little difference with the original one,its diameter and length a little larger ,the details as the follows:

DN2300X4700mm pressurizing and heating Composite Autoclave

No. Item Parameters

1 Effective Diameter: 2300mm

2 Effective Length: 4700mm

3 Work Temperature: 150℃

4 Work Pressure: 4.9MPa

5 Door open way: Hydraulic automatic side

6 Material: Q345R

7 Manufacture standard: GB150

8 Vacuum Lines: 6Lines

9 Thermocouple: 4Pcs

Our company engineer have made some new design for the pressurizing and heating composite autoclave structure. Due to its pressure more higher than before. About the open door device,our engineer adopt the very high strength forging as the main parts. And also we update the design for the hydraulic cylinder. And also for raw materials,we use china best quality pressure vessel usage steel factory -Wuyang raw materials.

After the projects confirmed, we arrange our best workers into this projects purchase and manufacture works. In fact ,Our company completed the production of the pressurizing and heating composite autoclave as scheduled after by intense and orderly manufacturing. Our company achieved the promise date for the customer. All indicators have exceeded the customer’s requirements after making various tests and inspections. Finally, the customer is very satisfied with the acceptance work.

The pressurizing and heating composite autoclave successfully delivery after by various prepare work. And it will reach customer workshop soon. In the future, Tai’an Strength Equipments Co., Ltd. will continue to increase investment in technology research and development , providing customers with higher quality and higher technical requirements products and services.

About STRENGTH Equipments

Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines. Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.

STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service. ODM, OEM are also available. If you have any questions or inquiries, please fill and submit the following form, we will reply as soon as possible.

https://www.industrialautoclaves.com/

ASME Buffer Tank Delivered to Cambodia

Buffer tank (also called air tank, pressure tank, etc.) is mainly used for all kinds of systems in the buffer system pressure fluctuation. Such as central air conditioning, boiler, water heater, frequency conversion, constant pressure water supply equipment, the buffer system pressure fluctuation, eliminate the water hammer to stabilize the unloading role, so that the system works more smoothly.

The buffer performance of the buffer tank is mainly achieved by the compressed air in the compression tank. When the water pressure or air pressure changes slightly in the system. Again buffer tank will have a certain buffer effect on the change of pressure, which can ensure the stability of the pressure of the system. Next the pump will not open frequently due to the change of pressure. Buffer tank is widely used in water supply equipment, central air conditioning system, etc.

At the beginning of Jan. 2022, TAIAN STRENGTH contracted the construction of 5 sets of 50m3 and 1 set of 12m3 ASME buffer tank for the Cambodia Project Department of the Vinci Group. First batch was successfully delivered on 25th, March 2022. In addition the second batch was shipped on 7th, June 2022 from Qingdao Port, China to Sihanoukville Port, Cambodia.

Vinci Group is a construction service company with a history of more than 100 years. Furthermore it is the world’s largest contracting, construction and related service company. According to the needs of the project, a water conservancy project department in Cambodia hopes that our company will contract to build 5 sets of 50m3 and 1 set of 12m3 buffer tanks, specific parameters are as follows:

Specification of Buffer Tank

Volume (m3):50;12

Design Pressure (MPa):1.6

Surface Treatment:Sand blasting (The grade must reach SA2.5)

Paint Requirement:Jotun Paint(The film thickness should be at least 450um)

Design Standard:ASME

Qty. (Set):5;1

After obtaining the relevant technical requirements, our engineers immediately engaged in the relevant technical design, and made a detailed plan for this project. Later the technical standards were confirmed, the PO was also confirmed. Afterwards the intense and orderly production, the hydraulic test of the buffer tank was made successfully, witnessed by the inspectors of the Vinci project department. Then the hydraulic test was successfully completed. As well ,buffer tank fully met the test requirements. Gradually the hydraulic test was completed, TAIAN STRENGTH immediately arranged rust removal and sand blasting for the whole buffer tank, and strictly in accordance with the standard operation. After sandblasting and rust removal, spray painting should be arranged immediately. As the buffer tank is used for drinking water project, the relevant paint thickness and quality requirements are also very high.

Based on this high quality requirement, we chose Jotun, a world famous paint brand with high quality. In order to fully guarantee the final quality, our company is not stingy in terms of paint thickness. The Vinci project department requires 450um, but after the final inspection by the Vinci third-party personnel. The paint thickness exceeds the quality requirements in an all round way. And the customer is quite satisfied. Considering the damage to the paint caused by inland and sea transportation. Our company has specially made a detailed packaging scheme. After all procedures were completed and all project documents were submitted. Vinci staff were quite satisfied with our work and issued instructions to allow shipment.

Meanwhile, a water conservancy project department in Tanzania has a new procurement plan according to the project needs. After confirming the relevant technical requirements, our engineers made drawings according to the requirements, and the procurement of raw materials is also in order. It is expected to be delivered in middle October 2022.

About STRENGTH Equipments

Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines. Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.

STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service. ODM, OEM are also available. If you have any questions or inquiries, please fill and submit the following form, we will reply as soon as possible.

https://www.industrialautoclaves.com/products/storage-tank/ 

Pressure Vessel manufacture Taian Strength moved into new Factory

 On April 28, 2022, the pressure vessel manufacture Taian Strenght Equipments Co.,Ltd finished the relocation of the office building, all the works have finished.

Walking into the vast factory area, 12 luxurious large-word pressure vessel manufacture Tai’an Strength Equipment Co., Ltd. came into view. Continue walking in, a neat row of scientific research complexes is neat and elegant. And every corner of the wall has traces of our busyness.

The sun shines on the earth. This quiet and comfortable side is our strength as a team, innovating today and reaching the future!

Through years of unremitting efforts and pursuits. Our pressure vessel manufacture Strength people have won praise in the pressure vessel industry with the attitude and concept of “conscientiousness, striving for perfection, honest service, and pursuit of excellence”.

In the future, pressure vessel manufacture Tai’an Strength Equipment Co., Ltd. will continue to study and digest continuously. Combine with market needs, strive to improve our own capabilities in terms of technology and service. Create high-quality products and first-class services, and create market opportunities.

This house moving marks a new level of strength. The pressure vessel manufacture Taian Strength Equipments Co.,Ltd will present a new look to colleagues. And serve our customers with new concepts and quality!

From now on, we will create a new brilliance of strength with full work enthusiasm and good mental state. Then we will create a better future with a hundred times of efforts!

About STRENGTH Equipments

Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines. Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.

STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service. ODM, OEM are also available. If you have any questions or inquiries, please fill and submit the following form, we will reply as soon as possible.

Advantages of the Vacuum Autoclave Process

 Vacuum autoclave is one of the most common composite autoclave. According to the different production process, the type of composite autoclave selected is also different.

Advantages of the Vacuum Autoclave Process

1. Constant temperature, adjustable: The inside of large vacuum autoclave is heated by circulating hot air to heat the workpiece. And the temperature difference is small everywhere. At the same time, equipped with cooling system. As a result, the temperature can be strictly controlled within the process setting range.

2.Constant pressure: Using gas to pressurize, pressure through the vacuum bag to the workpiece surface. Furthermore the normal pressure at each point is equal, so that the workpiece is cured and formed under the same pressure.

3.Wide range of application: The mold is simple, high efficiency. Not only suitable for large area of complex surface of the plate, shell, but also suitable for simple shape of the plate, rod, tube, block. It can also be used for bonding assembly, small parts can be cured at the same time.

4.Stable and reliable molding process: Pressure and temperature are average, adjustable and controllable. So that the quality of molding or handover system is different and reliable; low porosity, controllable and average resin content; vacuum can be pumped when pressurizing, so that low molecular substances can be easily discharged.

5.Vacuum autoclave curing process: Regarding the process settings of some important products. It is possible to set special equipment control parameters and complete historical calling, to complete the puppet position setting, to complete the interspersed and docking of vacuum sampling pipes, and to complete equipment I /O inspection, etc.

The completion of the above process also requires a powerful software operating system. As well as a database of equipment control parameters under various product states accumulated through a large number of engineering cases. Therefore the equipment has strong adaptability and good control effects.

TAIAN STRENGTH vacuum autoclave, intuitive data display, and data monitoring and printing. The monitoring screen is mainly divided into 6 areas. The area 1 is the operation button, which controls the operation, pause, reset and alarm reset of the system. Area 2 is the operation menu, which is used to switch the screen. Area 3 is the temperature display. Area 4 is the switch status display. Area 5 is the process flow display, which displays the current process control state. And area 6 is the display of the composite autoclave state, which intuitively displays the relevant parameters of the entire processing process.

About STRENGTH Equipments

Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines. Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.

STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service. ODM, OEM are also available. If you have any questions or inquiries, please fill and submit the following form, we will reply as soon as possible.

Surge Vessel for DWTP of France Project Company Successfully Delivered

 In March, the spring returns to the earth, all things recover. The grass grows and the warbler flies. On March 25, 2022, the first batch of 5 sets of 50m3 and 1 set of 12m3 surge vessel for Cambodia Project Department of French Group . The surge vessel was manufactured by Taian Strength Equipment Co., Ltd. Finally, surge vessel was successfully delivered.

The surge vessel are also known as buffer tank, surge tank, air storage tank, pressure tank, etc. It is mainly used for the pressure fluctuation of the surge system in various systems. Such as central air conditioning, boiler, water heater, frequency conversion. And constant pressure water supply equipment. The pressure fluctuation of the surge system eliminates the water hammer. And it plays the role of pressure stabilizing unloading. So that the system works more smoothly.

Furthermore, the surge performance of the surge vessel is mainly achieved by the compressed air in the compression tank. When the water pressure or air pressure changes slightly in the system. The surge vessel will have a certain surge effect on the change of pressure. At last, it can ensure the stability of the pressure of the system. And the pump will not open frequently due to the change of pressure. Surge vessel was widely used in water supply equipment and central air conditioning system and other things.

France Group is a construction service company with a history of more than 100 years. And it is the world’s largest contracting, construction and related service company. Thanks to the original successful cooperation between our company and Vinci Myanmar surge vessel. On January 15, 2022, the Cambodia branch of France group came to us.

Baes on the the needs of the project, one water conservancy project department in Cambodia hopes that our company build 5 sets of 50m3 and 1 set of 12m3 surge vessel for them. The surge vessel design pressure is 1.6Mpa, ASME manufacture standard. Then whole surge vessel needs to be sandblasted (the sandblasting level needs to reach sa2.5), high-quality anti-corrosion paint. And the thickness of the paint film needs to be at least 450um. After obtaining the relevant technical requirements. Our engineers immediately invested in the relevant technical design work and formulated a detailed plan.

Thanks to the high-quality products provided by our company in previous projects. Afterwards, France company still has high trust in our company in this project. After the technical standards are confirmed, PO orders be confirmed by fax. Considering that the production of this project coincides with the Chinese Lunar New Year. In order to ensure that it can be completed within 60 days as scheduled. Our company immediately recruited elite soldiers to work overtime to complete the production.

On March 18, 2022, after the intensive and orderly production. The surge vessel successfully entered the hydraulic test work. The whole hydraulic test process have been witnessed by the inspectors of the France project department. The hydraulic test was successfully completed. And the surge vessel fully met the test requirements. After the hydraulic test was completed, our company immediately arranged rust removal and sandblasting for the whole surge vessel carried out strictly accordance with the requirements standards. After sandblasting and rust removal according to relevant requirements. The painting work should be arranged immediately.

Since this surge vessel project is used for drinking water, the quality requirements of the relevant paint thickness are also very high. Based on this high-quality requirement, our paint company chose Jotun, a world-renowned paint brand with high quality. In order to fully guarantee the final quality. Our company is not stingy in terms of paint thickness. The Vinci project department requires 450um, but after the final inspection by the third-party personnel of Vinci the paint thickness exceeds the quality requirements in an all-round way. Finally the customer is quite satisfied.

Considering the damage to cans of paint caused by inland and sea transportation. Our company has specially made a detailed packaging plan. After all procedures were completed and all project documents were submitted. Vinci staff were quite satisfied with our work and issued instructions to allow shipment.

Taking this opportunity of cooperation with surge vessel. Our company hopes to continue to provide customers with high-quality products in the future. Taian Strength Equipment Co., Ltd. sincerely welcomes friends from all over the world to come to our company to guide our work. Taian Strength Equipment Co., Ltd. will continue to improve itself and provide customers with satisfactory services.

About STRENGTH Equipments

Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines. Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.

STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service. ODM, OEM are also available. If you have any questions or inquiries, please fill and submit the following form, we will reply as soon as possible.