Buffer tank (also called air tank, pressure tank, etc.) is mainly used for all kinds of systems in the buffer system pressure fluctuation. Such as central air conditioning, boiler, water heater, frequency conversion, constant pressure water supply equipment, the buffer system pressure fluctuation, eliminate the water hammer to stabilize the unloading role, so that the system works more smoothly.
The buffer performance of the buffer tank is mainly achieved by the compressed air in the compression tank. When the water pressure or air pressure changes slightly in the system. Again buffer tank will have a certain buffer effect on the change of pressure, which can ensure the stability of the pressure of the system. Next the pump will not open frequently due to the change of pressure. Buffer tank is widely used in water supply equipment, central air conditioning system, etc.
At the beginning of Jan. 2022, TAIAN STRENGTH contracted the construction of 5 sets of 50m3 and 1 set of 12m3 ASME buffer tank for the Cambodia Project Department of the Vinci Group. First batch was successfully delivered on 25th, March 2022. In addition the second batch was shipped on 7th, June 2022 from Qingdao Port, China to Sihanoukville Port, Cambodia.
Vinci Group is a construction service company with a history of more than 100 years. Furthermore it is the world’s largest contracting, construction and related service company. According to the needs of the project, a water conservancy project department in Cambodia hopes that our company will contract to build 5 sets of 50m3 and 1 set of 12m3 buffer tanks, specific parameters are as follows:
Specification of Buffer Tank
Volume (m3):50;12
Design Pressure (MPa):1.6
Surface Treatment:Sand blasting (The grade must reach SA2.5)
Paint Requirement:Jotun Paint(The film thickness should be at least 450um)
Design Standard:ASME
Qty. (Set):5;1
After obtaining the relevant technical requirements, our engineers immediately engaged in the relevant technical design, and made a detailed plan for this project. Later the technical standards were confirmed, the PO was also confirmed. Afterwards the intense and orderly production, the hydraulic test of the buffer tank was made successfully, witnessed by the inspectors of the Vinci project department. Then the hydraulic test was successfully completed. As well ,buffer tank fully met the test requirements. Gradually the hydraulic test was completed, TAIAN STRENGTH immediately arranged rust removal and sand blasting for the whole buffer tank, and strictly in accordance with the standard operation. After sandblasting and rust removal, spray painting should be arranged immediately. As the buffer tank is used for drinking water project, the relevant paint thickness and quality requirements are also very high.
Based on this high quality requirement, we chose Jotun, a world famous paint brand with high quality. In order to fully guarantee the final quality, our company is not stingy in terms of paint thickness. The Vinci project department requires 450um, but after the final inspection by the Vinci third-party personnel. The paint thickness exceeds the quality requirements in an all round way. And the customer is quite satisfied. Considering the damage to the paint caused by inland and sea transportation. Our company has specially made a detailed packaging scheme. After all procedures were completed and all project documents were submitted. Vinci staff were quite satisfied with our work and issued instructions to allow shipment.
Meanwhile, a water conservancy project department in Tanzania has a new procurement plan according to the project needs. After confirming the relevant technical requirements, our engineers made drawings according to the requirements, and the procurement of raw materials is also in order. It is expected to be delivered in middle October 2022.
About STRENGTH Equipments
Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines. Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.
STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service. ODM, OEM are also available. If you have any questions or inquiries, please fill and submit the following form, we will reply as soon as possible.
没有评论:
发表评论