2018年10月25日星期四

Pakistan Customer Placed Pressure Vessel Ends Order

Pressure vessel ends  are  major  component of  pressure vessel.The main role  is sealing. Pressure vessel ends are to make up and down the bottom of the pressure vessel.Pressure vessel ends mainly used for both ends of  pressure vessel.
In March, we got pressure vessel ends inquiry from Pakistan.
Diameter 2000 mm,material is SA 264(base metal SA-516/SA-516 M Gr.70 thickness 12 mm & cladding SA-240/SA-240 M TYPE 316 L thickness 3 mm) Material of pressure vessel ends is required as per Certificate EN 10204 type 3.2.
Certificate EN 10204 type 3.2 is a valid certificate for customers to prove that their products comply with the European material specification. Generally for large export equipment, pressure equipment and other products, their raw material suppliers are required to provide EN 10204 type 3.2 certificate to prove the raw materials used on the equipment. Is in line with European norms. EN 10204-3.2 certificate applies to any metal material, such as steel, welded parts and other products.
The issuing agency of EN10204 type 3.2 must be an EU authorized agency. After conducting related tests on the types of products purchased by the buyer of the factory, the results of the inspection of the buyer’s reputation with the factory as a third party are in compliance with the order.
The certificate must also reflect the name of the customer and the name of the production plant.
Pakistan Customer Placed Pressure Vessel Ends Order

Pakistan Customer Placed Pressure Vessel Ends Order

EN10204 type 3.2 is manufacturer-independent inspection representative and a document issued by a buyer-authorized inspection representative or inspection staff appointed by the official regulations, which states the consistency of the product with the contractual requirements and includes the results of the test. Joining the manufacturer to perform the traceability steps and provide corresponding inspection documents that meet the requirements, and to confirm that the manufacturer submits the test results obtained on the original product or the products it receives.
We found the third party inspection which can issue  Certificate EN10204 type 3.2 of the material of pressure vessel ends and gave customer quotation of pressure vessel ends .Now the customer have placed pressure vessel ends  order to us.
About STRENGTH Equipments
Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines.  Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.
STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service.  ODM, OEM are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.

2018年10月18日星期四

ASME Torispherical Head Will be Placed Order from Pakistan

Asme torispherical head is usually made of carbon steel, stainless steel, cladding steel, austenitic and non-ferritic metals. Asme torispherical head is composed of a spherical surface, a straight edge of a cylinder with a certain height, and a transition part connecting the above two parts with a radius of curvature smaller than the radius of the spherical surface. Asme torispherical head is a continuous surface. At the junction of the three parts, there is a sudden change in the radius of curvature of the warp. Due to the change in curvature, there is a bending stress. The result of the superposition of the bending stress and the tensile stress makes the stress in this part stand out from other parts. Compared with elliptical heads, the stress distribution is not as uniform as it is, but it is easier to process and therefore not ideal for use in engineering. However, when the elliptical head mold is difficult to process.It can be replaced by asme torispherical head .


Asme torispherical head will be placed order from Pakistan

Asme torispherical head will be placed order from Pakistan (2)


Asme torispherical head is widely used in pipes and pressure vessels because of their better overall performance. 1. When the pipe is at the end and is not ready for extension, it is welded to the pipe with a head and used as an end. 2. It is used on the pressure vessel. There is a head on the left and right, and a straight pipe section in the middle. It is used as a tank for pressure vessels.
Inquiry of asme torispherical head from Pakistan customer details as below,inner diameter 2000mm,material is SA264,customer request base metal SA516 Gr.70,thickness 12mm cladding material SA-240 type 316L thickness 3mm. SA264 is  one cladding steel.It also has the characteristics of two different types of steel, both the corrosion resistance of stainless steel, but also has the advantages of low price and good rigidity of ordinary steel.Pakistan customer will place asme torispherical head order next month,hope we have a good cooperation.
About STRENGTH Equipments
Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines.  Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.
STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service.  ODM, OEM are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.

2018年10月14日星期日

Pakistan Customer Placed Pressure Vessel Ends Order

Pressure vessel ends are  major  component of  pressure vessel.The main role  is sealing. Pressure vessel ends are to make up and down the bottom of the pressure vessel.Pressure vessel ends mainly used for both ends of  pressure vessel.
In March, we got pressure vessel ends inquiry from Pakistan.
Diameter 2000 mm,material is SA 264(base metal SA-516/SA-516 M Gr.70 thickness 12 mm & cladding SA-240/SA-240 M TYPE 316 L thickness 3 mm) Material of pressure vessel ends is required as per Certificate EN 10204 type 3.2.
Certificate EN 10204 type 3.2 is a valid certificate for customers to prove that their products comply with the European material specification. Generally for large export equipment, pressure equipment and other products, their raw material suppliers are required to provide EN 10204 type 3.2 certificate to prove the raw materials used on the equipment. Is in line with European norms. EN 10204-3.2 certificate applies to any metal material, such as steel, welded parts and other products.
The issuing agency of EN10204 type 3.2 must be an EU authorized agency. After conducting related tests on the types of products purchased by the buyer of the factory, the results of the inspection of the buyer’s reputation with the factory as a third party are in compliance with the order.
The certificate must also reflect the name of the customer and the name of the production plant.
Pakistan-customer-placed-pressure-vessel-ends-order

Pakistan-customer-placed-pressure-vessel-ends-order-

EN10204 type 3.2 is manufacturer-independent inspection representative and a document issued by a buyer-authorized inspection representative or inspection staff appointed by the official regulations, which states the consistency of the product with the contractual requirements and includes the results of the test. Joining the manufacturer to perform the traceability steps and provide corresponding inspection documents that meet the requirements, and to confirm that the manufacturer submits the test results obtained on the original product or the products it receives.
We found the third party inspection which can issue  Certificate EN10204 type 3.2 of the material of pressure vessel ends and gave customer quotation of pressure vessel ends .Now the customer have placed pressure vessel ends  order to us.
About STRENGTH Equipments
Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines.  Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.
STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service.  ODM, OEM are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.

2018年10月7日星期日

ASME Torispherical Head Will Be Placed Order From Pakistan

Asme torispherical head is usually made of carbon steel, stainless steel, cladding steel, austenitic and non-ferritic metals. Asme torispherical head is composed of a spherical surface, a straight edge of a cylinder with a certain height, and a transition part connecting the above two parts with a radius of curvature smaller than the radius of the spherical surface. Asme torispherical head is a continuous surface. At the junction of the three parts, there is a sudden change in the radius of curvature of the warp. Due to the change in curvature, there is a bending stress. The result of the superposition of the bending stress and the tensile stress makes the stress in this part stand out from other parts. Compared with elliptical heads, the stress distribution is not as uniform as it is, but it is easier to process and therefore not ideal for use in engineering. However, when the elliptical head mold is difficult to process. It can be replaced by asme torispherical head .

Asme-torispherical-head-will-be-placed-order-from-Pakistan

Asme-torispherical-head-will-be-placed-order-from-Pakistan-

Asme torispherical head is widely used in pipes and pressure vessels because of their better overall performance. 1. When the pipe is at the end and is not ready for extension, it is welded to the pipe with a head and used as an end. 2. It is used on the pressure vessel. There is a head on the left and right, and a straight pipe section in the middle. It is used as a tank for pressure vessels.
Inquiry of asme torispherical head from Pakistan customer details as below,inner diameter 2000mm,material is SA264,customer request base metal SA516 Gr.70,thickness 12mm cladding material SA-240 type 316L thickness 3mm. SA264 is  one cladding steel.It also has the characteristics of two different types of steel, both the corrosion resistance of stainless steel, but also has the advantages of low price and good rigidity of ordinary steel.Pakistan customer will place asme torispherical head order next month,hope we have a good cooperation.
About STRENGTH Equipments
Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines.  Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.
STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service.  ODM, OEM are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.