ASME Torispherical Head Will be Placed Order from Pakistan

Asme torispherical head is usually made of carbon steel, stainless steel, cladding steel, austenitic and non-ferritic metals. Asme torispherical head is composed of a spherical surface, a straight edge of a cylinder with a certain height, and a transition part connecting the above two parts with a radius of curvature smaller than the radius of the spherical surface. Asme torispherical head is a continuous surface. At the junction of the three parts, there is a sudden change in the radius of curvature of the warp. Due to the change in curvature, there is a bending stress. The result of the superposition of the bending stress and the tensile stress makes the stress in this part stand out from other parts. Compared with elliptical heads, the stress distribution is not as uniform as it is, but it is easier to process and therefore not ideal for use in engineering. However, when the elliptical head mold is difficult to process.It can be replaced by asme torispherical head .

Asme torispherical head is widely used in pipes and pressure vessels because of their better overall performance. 1. When the pipe is at the end and is not ready for extension, it is welded to the pipe with a head and used as an end. 2. It is used on the pressure vessel. There is a head on the left and right, and a straight pipe section in the middle. It is used as a tank for pressure vessels.

Inquiry of asme torispherical head from Pakistan customer details as below,inner diameter 2000mm,material is SA264，customer request base metal SA516 Gr.70,thickness 12mm cladding material SA-240 type 316L thickness 3mm. SA264 is  one cladding steel.It also has the characteristics of two different types of steel, both the corrosion resistance of stainless steel, but also has the advantages of low price and good rigidity of ordinary steel.Pakistan customer will place asme torispherical head order next month,hope we have a good cooperation.

About STRENGTH Equipments

Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines.  Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.

STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service.  ODM, OEM are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.