Technical Process of Carbon Fiber Yarn Oven

The curve of carbon fiber yarn oven (also called composite autoclave) matrix resin mainly influence by resin molecular structure, also influenced by other components such as curing agent, cross-linking accelerator and so on. Outside conditions such as temperature, pressure and time are very important to curving process, these three datas called process parameters.

Now the current domestic and foreign carbon fiber yarn oven resin curing pressure, except for polyimides, is generally controlled within the range of 0.3-0.6Mpa. Composite materials pressure for carbon fiber yarn oven is  usually lower than 1.6Mpa. For technical process, the transformation of matrix resin from linear structure to three-dimensional network structure can be divided into three stages such as flow stage, gel stage and curing stage, this process is among stable temperature. Domestic aircraft structure used composite matrix resin curing temperature. This temperature is the upper of domestic carbon fiber yarn oven temperature.

Distribution of temperature in composite autoclave will have air stirring circulation device in it, the main function makes the temperature uniform.

The main composite materials production defects from high to low is stratification, porosity, rich fat, poor adhesive, debonding, looseness, weak adhesive and deformation, among this stratification take high, the proportion of excess over pores and pores is also relatively high, while the proportion of other defects is relatively low. So stratification defects are composite autoclave technical process. When the material system is consistent, the delamination is mainly affected by the structural form and technological conditions of composite components.

About STRENGTH Equipments

Taian STRENGTH Equipments Co., Ltd is the professional pressure vessel designer, manufacturer and exporter dedicated in supplying finest quality industrial autoclave, storage tank and dish head products and solutions to worldwide customer over 20 years. We have over 80 talented research and development experts, 2 million square meters manufacturing factory and more than 50 sets large-scale manufacturing machines.  Our annual industrial autoclave and storage tank output can reach over 300 sets, dished head output can reach over 3000 sets.

STRENGTH Equipments is not only manufacturing high quality industrial autoclaves, storage tanks and dished ends but also providing custom product design, fabrication and after-sale service.  ODM, OEM are also available. If you have any questions or inquiries,  please fill and submit the following form, we will reply as soon as possible.